Diagram how to fit serpentine belt land rover discovery 2001 td5
SOURCE: looking for serpentine belt diagram land rover discovery 1996
Here is the diagram you asked for...
Please be sure to give a positive rating for this answer. Thanks...
SOURCE: which serpentine belt do I need for my 2001 Land Rover Discovery
I have responded to this problem in the past. 2001 discos had an ACE (Active Cornering Enhancement) option. ACE vehicles had an additional hydraulic pump for the system therefore ACE vs Non_ACE cars require different belts.
SOURCE: is it possible to fit land rover discovery 2 wheel
is their any difference?? i would really need to get my hands on and around this to see whats what ,but i should think it could be done
SOURCE: how to adjust rocker shaft on discovery td5
There are adjustment screws on the rockets according to RAVE.
The procedure is as follows:
1) Rotate the engine clockwise until No 1 injector lobe is at full lift.
2) Rotate rocker adjusting screw clockwise until the injector plunger is felt to bottom out.
3) Rotate rocket adjusting screw anti-clockwise one complete turn to give plunger the required bump clearance and tighten rocker arm adjusting screw locknut to 16Nm. Ensure the screw does not turn as the locknut is tightened.
4) Carry out the procedure for the remaining 4 rocker arms.
5) After completion of rocker arm adjustment slowly rotate engine clockwise 2 complete turns by hand to ensure that no injectors are bottoming out on their plungers.
404 views
Usually answered in minutes!
×