Control arm bushing
SOURCE: 91 lexus ls 400 rear suspension
1992 Toyota Avalons are simuliar in design. The Y-Yard may have componiants to repair the parts needed. Go to Y-Yard.com the have a directory to look up parts.
SOURCE: 92 lexus ls 400 check engine and traction control light came on at the same time, 92 lexus ls 400.
the track off light will come everytime yhe check engine light comes on. this is normal. you need to have the check engine light checked first.you can go to your local parts house they will scan it for so you at least see what area you problem is in and then you can start from there. let me know lf you find out youe engine codes.
SOURCE: rear suspension,bushings,2005 jeep liberty
Generally the bushings aren't too expensive (likely about 25-30 each...But, unless you have done this kind of work, driving the bushings out and installing them can be difficult without a press. I've done many in-shop and its nothing like the ones I've done at remote locations using a hammer and chisels etc. You can do this yourself but I'd opt to do the r&r at home and have a machine shop do the actual bushing pressing. If you damage the arm ends you will need to replace the arm or do a bunch of bending to get the bushings back in place.
If you do have a press, than go at it!!
SOURCE: Fuse Box ( cover) diagram for a 95 Lexus LS 400 is missing.
check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.
183 views
Usually answered in minutes!
×