SOURCE: 1997 Jeep wrangler
Clock spring mech is prob bad, first easy check is remove airbag 2 8mm bolt from back side of wheel make sure wires are still connected if they are good the clock spring mech is bad you can use a steering wheel puller to remove wheel and clock spring mech just snaps out and has 2 plugs on it, I have 2 if you need one.
SOURCE: Speedometer on 1992 Jeep Wrangler YJ not working.
The sensor for the speedometer is in the tailshaft of the transmission its called a vss vehicle speed sensor,all you have to do is unplug the plug and unthread it and replace.
SOURCE: 97 Jeep Wrangler Dash Gauges Arent Operating..everything else ok!
I have a 98 Wrangler - same problem. Dash gauges would work, then out (airbag light came on). Then it would work for a week or two than out.
Tried looking at fuses, wires, aftermarket radio problems, etc.
When I pulled the instrument cluster out of the dash, I noticed a lot of goop (lubricant) on one of the cluster plugs. So I wiped it off with a paper towel and now everything works. Maybe too much goop was shorting stuff out? Anyway, I'll know in a couple of months if that was my problem or not assuming my gauges keep working uninterrupted.
ranger326
SOURCE: Have 97 Jeep Wrangler with instrument cluster
I am having the same issue with my 98. Did you figure it out?
SOURCE: 1998 Jeep Wrangler. Airbag light is on and the
You have a bad "clockspring" inside the steering wheel. A bit complex to write it all out and if I forget anything the bag could deploy in your face while changing it out. You can find detailed instructions for that job in both chilton or haynes manuals.
308 views
Usually answered in minutes!
×