1995 grand marquis ls
More than likely the plastic gear in the motor has went out. you could easily but a new motor or take the old motor out and remove the one screw that holds the cover over the gear and dump out all the old gear shavings then insert 3 7/16 bolts in their place. it works perfect in my 95 grand marquis on both front windows
more than likely the plastic gear in the motor has went out. you could easily but a new motor or take the old motor out and remove the one screw that holds the cover over the gear and dump out all the old gear shavings then insert 3 7/16 bolts in their place. it works perfect in my 95 grand marquis on both front windows
Actually the motor is fine it's the cable those windows are ran by a cable and the cables come off track and it is a pain in the you-know-what to fix
×
Gear in motor stripped or regulator
SOURCE: How to install a new power window motor in my 1993
Remove all screws to door panel. Remove the lock and window controls. Then take large flat-tip screwdriver and gently pry directly next to plastic studs holding panel on to door. Lift door panel off. Remove plastic out of the way. You will now have access to window motor. You may have to solder off old wiring. Or if you have enough to cut, would be good
583 views
Usually answered in minutes!
×