20 Most Recent 1990 Nissan Sentra - Page 7 Questions & Answers

it should be .045". depending on the year there maybe a sticker/decal under the hood that says what the plug gap is.

Fuse blown?

Guys what is the torque specs for nissan sentra 1995 model 16v twin cam caburatter

What do you mean "push start"

On this website you find fuse box diagram and description for Nissan Sentra (2006) https://www.carknowledge.info/nissan-sentra-2000-2006-fuse-box-diagram/ https://www.autogenius.info/nissan-sentra-2000-2006-fuse-box-diagram/

Front of right fender.

This diagram is in the factory service manual. You can buy acces to that here: www.alldatadiy.com

go there to the dealer and get it fixed, car toys are not simple. and endless types. (and bad documentation abounds) Id pull the fuse to it count to 100 and put back. see if you can reset it that why some have 2 fuses, one main, and battery backup power. pull both fuses.

2.3 ohms resistance ???

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

hello u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

Let's hook up a fuel pressure gauge to the fuel rail and see what the fuel pressure does. If it drops below minimum the there is a fuel problem being pump or filter or line restriction. If it has good pressure under load, then check the exhaust system. A restriction in the exhaust will cause loss of power under a load.

there's a website reliable-store all heavy equipment repa ir issues servicing, loading, wiring, engine problems everything is covered here its a must try

Her's a web link for you to see the torque and sequence depending on the engine size, 2.0 or 2.5 from 2007 to 2012..https://www.autozone.com/repairguides/Sentra-2008/Engine-Mechanical-Components/Intake-Manifold/_/P-0996b43f81b3d045

Pull the bottom cushion out first and then the back cushion.

Need to know engine size to compare

DTC - B1210 COLLISION DETECTION The air bag diagnosis sensor unit will set this DTC if it has detected a collision which has resulted in a frontal or side deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag diagnosis sensor unit has not yet been replaced. This DTC can not be erased. Please see the dealer on this.

https://www.carcarekiosk.com/video/2013_Nissan_Sentra_SV_1.8L_4_Cyl./fuse_engine/replace

There are many things that could cause this.. but some of the most common and easiest rough idle fixes tend to be air filter or fuel filters that are dirty and need to be cleaned or replaced

I would check those first... but there could be many other factors.

Jump Starter direct with 12VDC to check for starter motor operation.