20 Most Recent 2010 Dodge Caliber - Page 2 Questions & Answers

I don't have a manual for your model, but did find a YouTube video for a 2008 Dodge Avenger showing the location of a couple of actuators on the HVAC box. It may not be exactly the same for your car, but it should give you an idea of what you're looking for. There are a few more videos for Dodges, but mostly for Rams (pickups). 2008 dodge avenger blend air actuator location

have AAA?

Although the liftgate has no inside release mechanism, the liftgate trim panel includes an opening with a snap-in cap that provides access to release the latch in the event of an electrical system malfunction. It is possible that the handle is stuck in the "open position" which will not allow the hatch to unlock. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Are you able to move your shifter at all? If so, does the position 'p/r/n/d' indicator change?

James, plugged catalytic converter probable.

There are two thermostats - one for the cylinder head and one for the block (cylinder head thermostat is set to keep cylinder head cooler). Location of the primary (cylinder head thermostat) #3 is where the upper radiator hose is mounted to the engine. Secondary thermostat #4 is somewhat lower but in the same area/housing. see link Thermostat and Related Parts 2 0lL ECN 2 4L ED3 Selected part 55111016AC...

caliber is a wire going to the sensor with a small bolt holding the sesor in place remove thelittle small bolt and take a pair of plyers and remove the metal part of sesor carefully wiglling it side to side slowly now pull it out and spray some brake cleaner or pb blaster stuff in to it and do this with all them placing them all back in place again tighten them all and your good drive around for a few days to a week and the tpsms will go off its a tire pressure sensor another words tire pressure sensor monitor system tells how much air pressure is riding on the wheel well thats how its done or you can go to auto zone and they can use there scan tool to reset it for you free of charge have a nice day !!

this light is usually an indication that the security system has been activated and won`t allow the car to start. it will have to be reset. disconnecting the battery will not turn off the anti-theft as it will indicate the car is being stolen. did you use the proper key to start it when this happened. it could also be a problem in the BCM.

I know of no recall. This is not acoomon problem. I would think that maybe the Body Control Module is defective it controls the wiper motor.

CHECK YOU FUEL FILTER FOR RESTICTION

I agree with Jerry - sound like perhaps your ECM fuse is blown which would prevent your car brains from working. Take off the cover, invest in a tiny fuse puller - you can see the break in the "U" shaped metal or black splat if the fuse cut-loose. Also, make sure you don't have anything plugged-into your cigarette/power outlet(s) and after checking/replacing fuses, retry restarting your car. Also, what red light is on - the two zig-zag lighting bolts, or all/some of your lights?