20 Most Recent 2007 Dodge Caliber 2.0 Questions & Answers

there are fusible links that will melt,like a fuse,find all of them and replace the bad ones,its on the secondary wire to the positive side of the battery

The signal to the alternator is controlled by the ECM/PCM, so the best thing to do is check all connections to the alternator and battery to make certain that they are clean and tight and have the vehicle scanned for fault codes.
There is one larger red w/grey wire to the alternator, that should have power from the battery, if it does not, then the fusible link to that wire has blown. If there is power to that wire, then the problem may either be in the alternator itself or the PCM.
If that is the case, you will need to hook up a scanner to it, to see what the PCM is saying that the charging system voltage is.

2007 Dodge... | Answered on Apr 07, 2019

I know this website www.reliable-store.com that i get manuals from, and they have all models online that solve all simple/technical problems like professionals

I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

2007 Dodge... | Answered on Mar 14, 2018

remove and replace gas cap. If that doesn't fix it, replace with a new gas cap.

2007 Dodge... | Answered on Jan 02, 2017

The front wipers are controlled by the TIPM - totally integrated power module (electronic module ) ! Check power an ground at the wiper motor connector . Four wires , Black is ground , brown / white is low speed , brown/lite blue is high speed ,brown / orange is park switch sense . Can you do this ? Go to http://bbbind.com/free_tsb.html free wiring diagrams ! Videos on you tube on basic automotive electrical testing , how to read a wiring diagram , how to use a DVOM etc... That is if you don't already know how to . Defective TIPM Is Causing Dangerous Power Problems in Chrysler Vehicles Then again after you read this you may want to take it to the dealer !

2007 Dodge... | Answered on Sep 28, 2016

What is the standard OBD2 code please.

2007 Dodge... | Answered on Sep 12, 2016

Doubtful a motor/fuse issue if the wipers try to work. Suspect a seized wiper pivot causing the linkage not to operate. The pivot is what the wiper arm/s attach to. To verify, you need to disconnect the wiper transmission asssembly from the wiper motor and try to manualy move the linkage by hand. In some cases the pivots can be lubricated making them free up and turn again. In most cases the entire linkage will need to be replaced

2007 Dodge... | Answered on Jan 05, 2016

It could be attached to the firewall or it could be under the vehicle just behind the gas tank but easily visible. Yours might look similar to the one seen in this next video. Watch this video to learn more about locating your fuel filter. https://www.youtube.com/watch?v=c0arQ9PABBQ

2007 Dodge... | Answered on Dec 22, 2015

Should be a label in the engine compartment

2007 Dodge... | Answered on Apr 16, 2015

Simply disconnect the battery there no fuse for a check engine light the light come on by the computer see something wrong because it doesnt start or you simply want to remove the light

2007 Dodge... | Answered on Mar 22, 2015

Not finding what you are looking for?
2007 Dodge Caliber 2.0 Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Caliber Dodge

  • Caliber Dodge

Most Popular Question

code 7e9a t

  • Cars & Trucks