Questions & Answers for: worth repair turntable

...worth repairing ? Thanks The Technics SL-BD22 is a belt driven turntable. It is most likely possible that the belt wore off, wore down, or could have spun off. The platter should have 2 holes in it. ...

...Repair wise, your probably looking at about $80-120 for parts and labor. It's a well build turntable, and I think worth investing in trying to get it repaired. Just make sure you get an estimate ...

...Model. The turntable works, but I need a needle to put in arm that plays the records. Where can I find a needle? Is it worth repairing or to be recycled? try this company? ...

to get it rotating. Now the platter does not turn at all. What is the problem and is it worth repairing? Have you had a look at the drive belt below turntable could possibly need replaced with new one

...turntable has been fine until recently when it needed a push start to get it rotating. Now the platter does not turn at all. What is the problem and is it worth repairing? if the platter is removable ...

...turntable worth at best £20 on the open market then certainly give him a call for advice as he may know someone nearer. He's an incredibly knowledgeable, trustworthy and friendly bloke and a few ...

...worth fixing the turntable motor is arcing to the spindle and fused the 3 leg roller support to the spindle. is this something this economical to repair; is it even fixable? thanks! If arcing and is ...

...As the unit is obsolete, the repair could easily cost more than the unit's worth. Consider buying a used one off Ebay (currently there are 9 units available. One going as low as $16 +

...motor is defective or there is a problem with the control board. The turn table sits on a key that connects directly to a motor. If the motor is shot, youy can replace it but its not worth the

...be cleaned. Use tuner spay cleaner (if you can still find some around) , also clean the RCA inputs. . If that does not work.. you may have to replace the receiver. The cost to repair is not worth it