Questions & Answers for: wires distributor

...distributor cap . Ensure ignition wires are properly seated on the terminals. The No. 1 terminal is identified on distributor cap . not sure if #1 cylinder is on the front right or front left. Call a ...

Ad

...rotor, don't remove the spark wires. 2. unplug the wire from the distributor. 3. remove the distributor bolts, pull the distributor out. When install the distributor make sure replace the new O

Ad

...wires "snap" firmly in cap towers. Install distributor hold-down clamp screw. Tighten screw finger tight.Connect distributor pick-up lead wire(s) at wiring harness connectors. Adjust engine timing to ...

Question about 1992 Tempo

2 Answers

...wires on distributor cap so you can replace cap and rotor and put wires back on the distributor cap in correct place.remember change one plug wire at a time so you wont get confuse. Buy your new set. ...

...distributor cap. Ensure wires are all the way down over their terminals. The No. 1 terminal is identified on cap. Install wires starting with No. 1 terminal. Remove wire retaining brackets from old ...

I need the wiring diagram for a 1978 351 windsor distributor I am trying to replace a marine distributor (2 wires) with an automotive distributor (3 wires). I have the diagram for the boat distributor

...wires onto the distributor cap according to the engine's firing order. Check to make sure everything that was disconnected before the distributor was removed, is now connected. Connect a timing light ...

my 1995 dodge caravan trys to start but wont im getting no spark to my spark plugs Hi mate start at the easiest point which will be to check your EARTH to make sure everything is earthed. Engine ...

...know the firing order is 1-4-2-5-3-6 but don't know where to place the wires on the distributor.im in need of a diagram that shows where the wires go on the distributor Found this info, hope it

...Connect the remaining spark plug wires in firing order sequence to the distributor cap terminals. The firing order for a Buick 455 engine is 1-8-4-3-6-5-7-2. 6. Install the distributor cap and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...