...wire to hook up and what to hook it up to. I can't find a manual for this model or a wiring diagram. I really appreciate any help you can give me. Or if you can't help, could you please point me in ...
Question about DEH-P2900MP CD Receiver /AM/FM/MP3/ CD Player
...memory wire! i have installed a pioneer super tuner 3 d deh-1900 mp and i cannot figure out how to get the memory to stay! i get perfect sound and it works just fine i just can't get the memory to ...
...time gets reset you may not have hooked up the extra wire for the memory back up on the radio... it will stay live when you shut off the radio. Robert Please take a moment to rate this solution ...
...memory wire my harness got cut so i hooked the wires straight to each other. just dont know which wire of wires i connect to keep my memory. every time i kill my car and turn it back on i have to ...
wire are hooked up right and that you have a good ground on it if it has a power antena you have to hook that one up to a power supply to but first check the fuse's in the radio line to make sure that
Question about DEH-P2900MP CD Receiver /AM/FM/MP3/ CD Player
...hook the red,yellow and blue with the stripe, to the wire harness with orange lummination and orange dimmer negative,yellow batt. and blue i belive is egnition the speaker wires are easy so thy are ...
...do you get the player to automatically go to the spot on the CD where you had to turn it off. it sound like you stero aint getting the memory power thats hooked to the wire that stayes hot all the ...
...impossible to hook up for memory. The yellow wire needs to go to a constant source and the red wire should go to a switched (ignition) source. There should be a wire that is hot even with the key
...wire to the positive side of the battery)..thios lead is the memory lead that keeps stations, settings, and the clock....then there is the red lead that is supposed to be hooked up to a switched ...
Question about Deh150mp Cd/Mp3 Car Receiver Player Stereo Radio Aux Aux
...memory In the Radio. The Yellow wire on this unit is the constant power and needs to be hooked to 12v. Hope this helps. There is also an on\off in the settings for this unit to keep your ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions