Questions & Answers for: windows fuse ford 2000 mustang

Question about 2000 Mustang

1 Answer

fuse or motor? I have a 2000 ford mustang convertible. My rear passenger window will not roll down. Today I pushed on it really hard while someone held the button down and it did go down, but didnt go

Ad

...but my fuse box cover is gone and I don't have my owners manuel to check and see which fuse is for my windows This is the entire fuse panel as well as the relay box Hope this helps Part 1 Part 2 Part ...

Ad

Question about 2000 Mustang

1 Answer

2000 mustang convertible and the window shattered. I opened the door after that and now it won't close. I cleaned the glass out of door panel but it still won't close. Any ideas? Is there some kind of

WHERE DOES THE FUSE GO FOR THE POWER WINDOWS? WHERE DOES THE FUSE GO FOR THE POWER WINDOWS on a 2000 ford mustang gt? look under the hood and if you fuse block or on the driver side

Question about 2000 Mustang

2 Answers

...fuse for the left lamp is #10 in the central junction box located behind the dash to the left of the steering column. my radio and power windows stopped working after restarting car they came back ...

...fuses. To remove a fuse use the fuse puller tool provided on the fuse panel cover. Check the position 43, 20 AMP CB for Power Windows Hope this helps; keep inn touch and remember to rate this

...cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the windows fuse, it should be around 30

Question about 2000 Mustang

2 Answers

...Windows. * CB 0 Circuit Breaker The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse ...

window and mirrors no working no power plz need help tkyou power window and power mirror no working plz help me thanks Sounds like a fuse problem. Have you checked the fuse for the windows/mirrors yet

...windows on passenger side and the key-less entry doesn't work would it be a fuse? Its probably not a fuse. Locking solenoids draw a lot of current and are usually fed from a relay. Check your

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...