Questions & Answers for: wd1600aajs jumper master

...Master. The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ). (Slave) - No jumper is required to configure the drive as a Slave. The jumpers over the J48, J46, J44 and ...

...jumper on HDD to switch it in sata I mode and MB doesn't detected it. Disk is WD1600AAJS. It was same with some Hitachi disk. Sata DVD is detected OK, only it isn't bootable... HELP! According to the ...

...jumper as master , it reads alright as IDXE master and it show my SATA hard drive ...try to install OS on to it .... it gets to " computer is inspecting your system " .............and back to setup ...

...jumper on that drive, if it is jumpered to Master then the CD drive needs to be jumpered to Slave. If the existing drive is jumpered as Slave then the CD drive needs to be jumpered as Master. Both ...

...Master Jumper ON, the Slave the Slave Jumper ON. CS is Cable Select. It isn't all that used. The reason why the Drive disappears is because the existing and new drives are set to the same jumper ...

how can i jumper wd1600avvs SATA drives don't need jumpers. Just install it and the computer will assign a drive letter to it.

...WD1600AAJS hard drive a master hard drive, but the port is diffrent than my other hard drives. what do i do? A SATA drive cannot be set to master or slave like a PATA drive can. SATA only allows one ...

...Here is the Western Digital web site. http://support.wdc.com/product/download.asp?modelno=SE+WD1600AAJS+160&x=7&y=10 ...

...WD1600AAJS drive. It was on a PC, got hit hard by malware. Need to copy off some critical directories from it. Plugged into another machine. Other machine will not fully boot with secondary drive in ...

my harddisk showng 0.0GB in bios and PATA mode , how i can resolve it plz help I would try to reseat the disk. Also, try clearing CMOS by removing the battery or repositioning the CMOS jumper. If that