...waffles for a few years. We used it twice and then one the third use, we made all but the last waffle, so I turned it back on and I waited and waited for the green light to come on. I finally checked ...
Question about WMK300 Professional Belgian Waffle Maker
...waffles without preheating the waffle maker and also used too much mix and it spilled over the entire waffle maker...does it come apart for cleaning? Can it be cleaned? If it is a non-stick surface ...
...WAFFLE MAKER If the plate are not removable, clean with soapy rag. Otherwise remove and clean with warm soapy water. After drying, re-oil with light coat of cooking or olive
...waffles won't stick for the next batch? It seems to have a non-stick surface but I'm afraid to wash it with warm water. Furthermore the grids are not detachable from the iron. Need info ASAP. Try ...
...to use if you could help solve my hungry stomach i would thank you so much Thoroughly clean with warm soapy water, that is the surfaces where the waffle will sit then thoroughly dry plug it in
...waffles long enough? If they are not completely baked they will not harden. Additionally if you are in a humid climate they may take a bit longer when you cook them otherwise the moisture will cause ...
Question about 65475 WaffleChef Waffle Maker
...warm water) to clean the baking plates. I towel dry everything after its clean, and clean the outside with a little windex so it stays nice and shiny. Good luck! I also recommend making lots of extra ...
...warm soapy water, followed by clean water. Clean the pans the least you can. Usually, if the waffles are leaving little to no residue, we just wipe the pans clean with a paper towel, and then put it ...
...waffles are done? Try letting it warm up for at least ten minutes. Then add waffle batter and leave closed for about five minutes and check the waffle. If it is way over done try three minutes other ...
Question about WMK300 Professional Belgian Waffle Maker
the waffles. If they are dirty and crusty now, you can put a very wet cloth on the plates, close the machine, heat it up to warm and then turn the machine off. The wet and warm will get the batter off
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions
