...be your turn signal/high beam switch. If the lights come on when you use the high beams replace this switch. It is available at most autoparts stores. Not a diffucult repair probably under two
...using the regular push the turn signal stick forward. High beams do work when you use the high beam quick flash by pulling the turn signal stick back. What is wrong?? and how do I fix?? Robert The ...
signal lights. Passing lights work,headlight works. Indicators work.All other lights work.When turning on high beam passing lights go out(should they go out when high beam is on?) I`m going by an 2002
...signal, both of my high beam lights flash, and I get no turn signals anywhere around the van. Same thing when I use my hazard lights. Brake, backup, parking lights, and high and low beam all work ok, ...
...signal, both of my high beam lights flash, and I get no turn signals anywhere around the van. Same thing when I use my hazard lights. Brake, backup, parking lights, and high and low beam all work ok, ...
...lights good. Played with light switch, no help. Could this be a fuze or relay?? No on the fuse . The LH HDLP and RH HDLP fuse in the fuse block - under hood, supply battery positive voltage to both ...
Question about 2005 Equinox LS
...using a volt meter ? Look at a wiring diagram to see what all is involved in turning the lights on ? Do you know how to test electrical circuits ? Also reading service repair manual about the head ...
Question about 2005 Equinox LS
...a high beam request signal (ON) via the CAN communication lines and turns the high beam indicator lamp ON. Relays are located in the underhood fuse relay box , look inside the lid for location
Question about 2005 Equinox LS
...using the turn signal/headlamp switch lever on the steering column. In order to change headlamp operation from low-beam to high-beam, push the switch lever toward the instrument panel (until the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions