Questions & Answers for: tripod leg locks

Tripod - Broken Leg Lock I have the above tripod and the plastic leg lock inside the tube broke, so the leg just falls out. I also have a Velbron Monopod that did the same thing. Is there a way to fix

...tripod leg cylinder. There are three segments to the leg, so each segment, except for the last segment closest to the tripod, can slide directly off the tripod when loose. Any solutions besides buy a ...

...can plastic tabs on leg locks be replaced on Sony vct670rm tripod? yes with the original plastic locks. "junk" go to ace and you will find some differant lock slides. I did and they are not

...locks Vivitar V900 tripod are breaking. The plastic locks on my Vivitar V900 that lock the telescoping legs are breaking and will not hold the legs in place. How do I get them repaired? the plastic ...

One leg on my tripod does not lock. It moves no matter if the lock is engaged or not. What can I do? Thank you leg locking mechanism of the leg is failed,so replace the broken part to get it locked.

tripod are no longer sufficiently locking the legs so they slip. How do I tighten them? Use an 8mm, I believe, socket and tighten 1/4 turn the nuts on the lower half of the leg lock. For instance, the

Leg stuck on Manfrotto 732CY tripod Both of the bottom 2 sections (from clip B and C down) on one of the legs are stuck on my tripod. What is holding inner parts to the leg in place? Other than the ...

leg lock in order for it to fit more securely. Ambico is no longer in business, and parts are not available so you might have to replace the tripod if you can't fix it yourself. You find tripods here:

...tripod model) HOWEVER IF YOU AREN'T....Giotto uses (2) different leg lock designs..., quick release (normally adjusted by a socket wrench) or rotary (screw locks)! - If tripod uses screw locks, ...

leg spread of this tripod? -Providing that the image shown is the tripod you own..., the top leg lock levers on each leg is designed to lock the spreader angle of each leg. -If this is not holding the