Question about 50H72 50" Rear Projection Television
...cant adjust the red convergence on a toshiba 50H72, it will only move up or down, making the picture blurry and to much red. Stk392-110 red convergence IC is bad...normal procedure=== 1) pull chassis ...
...cant move both red and blue in all 4 directions its usually your convergence amp ICs. They are prone to failure as they operate at such high temperatures. If you need any further info on this ...
...cant get convergence to manually adjust, got red to move over green ok but blue wont move far enough and blue icon is distorted/twisted not just off up/down or left/right think it is TZ50V51 model ...
Question about TP50H50 50" Rear Projection Television
...Toshiba, and others at some point will have the same problem. Common Symptoms include.... Screen looks 3D Colors don't line up One or more colors can't be adjusted when using the convergence menu. ...
Question about Magnavox 51MP392H Rear Projection Television
...toshiba rear projection tv and now it looks like a double picture and i cant figure out how to do a converging we cleaned every thing this tv had been working very well any ideas The position(s) of ...
toshiba model TP55C81 its picture is bowed and cant line the three lights nothing moves, found the board with all the adjustments and got no movement, also has one on the front panel wich does nothing
...Toshiba, and others at some point will have the same problem. Common Symptoms include.... Screen looks 3D Colors don't line up One or more colors can't be adjusted when using the convergence menu. ...
the green is bowed in my tv i tried convergence thing and on number 4, middle left the green is way off and i cant move it how do i fix this? Replace the convergence ics.
...Toshiba, and others at some point will have the same problem. Common Symptoms include.... Screen looks 3D Colors don't line up One or more colors can't be adjusted when using the convergence menu. ...
cant aling blue on convergence menu. it moves up and down but is way to right. but only the bottom right don't match. the rest is all perfect anyone have an idea? Where the convergence ICs are ,STK392
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions