Question about 2001 Grand Cherokee
...Torque Specs * Front band adjustment locknut - 30 ft-lb * Rear band adjustment locknut - 25 ft-lb * Transmission pan bolts - 13 ft-lb I just replaced the solenoid with the recommended transducer and ...
...specs for the Head Bolt Torque for my friend's 2000 2000 Grand Cherokee Laredo 4.0L the torque is a 4 step process 1 torque all bolts to 22 ft/lbs 2 torque all bolts to 45 ft/lbs 3 recheck all bolts ...
torque specs for a 1998 jeep Cherokee classic straight 6 4.0 liter? I am replacing the head gasket and need to find the lbs of torque. Thank you for any advice, pictures, etc. Torque sequence --------
...specs Torque settings are 110 ft LBS for nine of the ten bolts one bolt is 100 ft LBS /#1 Tighten all bolts in sequence 1 to 10 at 22 ft LBS #2 tighten all bolts 1 to 10 at 45 ft LBS #3 tighten all ...
...torque settings for the 4.0L MFI straight 6 engine? Regards Dave Here are the specs and sequence: Install the cylinder head and bolts. The threads of bolt No. 11 must be coated with Loctite® 592 ...
...torque specs foe a 2000 jeep with a 4.0 to be spacific i need the mains rods and head Hello mooredavid42, The Head bolt torque is as follows: 1. Tighten all bolt in the sequence shown in the image ...
Question about 1996 Grand Cherokee
...torque spec for a 2003 jeep wrangler 2.4 connecting rods ENGINE 2.4L DESCRIPTION N·m Ft. Lbs. In. Lbs. Balance Shaft Carrier to Block-Bolts 54 40 - Balance Shaft Gear Cover-Double Ended Fastener 12 - ...
Question about 1999 Cherokee
...Torque specs. for 4.0 cylinder head 2002 - Jeep Cherokee ... Jun 23, 2017 cylinder head torque specs on 94 4.0 - Jeep Cherokee Forum Sept 2, 2015 4.0 torque specs - Jeep Cherokee Forum Apr 12, 2017 ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions