...wont show anything. its all black but it still takes pictures and does everything else fine. darn toothy sam can fix it for about ...
...this problem?? Here are 2 answers I have ran across on the web. first is this fix posted here by toothy http://www.fixya.com/support/t103424-digital_sony_camera_fell_down_lens_got And the ...
...and liquid damage. Is my poor camera now just to be used for parts or is it salvageable by Toothy Sam or someone like him? These are electronic devices, and have NO tolerance for moisture ...
...happening. It may be the hook/needle timing. Or it could be the feeddogs are not moving (that's the toothy looking part under the presser foot that moves the fabric). Recommend removing thread and ...
...something or fit loose something your machine will be not work under that segment you will see one toothy plastic plate which moves with one small gear, that gear you have to change. That ...
...or stitch length balance. Without thread or fabric, turn the handwheel and watch the feeddogs (the toothy looking things under the presser foot which moves the fabric as you sew). The amount of ...
Lense was stuck out did what toothy said lense is now back in and won't come out. More info needed. Does the camera tell that a lens error has occurred?
...to the left. I can't even quide it back with my hands. remove the plate over the feed dogs (the toothy parts that move the material) it usually just pops off even if there are screw heads. the ...
...handle is down so that it holds the fabric from the top. Then make sure the feed dogs (the little toothy looking things under the presser foot) are up or engaged. Often we'll accidentally knock the ...
...mark.Then put the cam shaft so that the mark on it's sprocket is all the way up marking the "toothy" lump on the cylinder's head top.These marks (crankshaft & camshaft) should be ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions