Questions & Answers for: tighten rear view mirror

...is lose at the ball joint. is there any way to tighten it? My 1998 corolla rear view mirror is loose. How can I tighten it? you have to first remove the glass to tighten the adjusting screw

Ad

...tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard. Remove the front door ...

Ad

Question about 1994 3 Series

1 Answer

...Rear view mirror separated from mounting still on windshield. Can it be reattached? there is a small alan screw in the base of the backup mirror. loose it and slide the mirror back on to teh base on ...

Question about 2004 Santa Fe

1 Answer

rear view mirror needs tightening Got a bluetooth rearview mirror which attaches to the present mirror but too heavy which causes the mirror to fall. Any way to tighten. 2003 Mitsubishi Eclipse Spyder

...a set screw that I am not seeing to tighten and stop the interior rear view mirror from loosely dangling? I cannot visibly see one. No, the mirror is just a friction fit. You will need a new

Question about 1996 Town Car

1 Answer

...mirror base. Remove outside rear view mirror from front door (20124). Guide wiring and connectors through hole in front door. To install, reverse Removal procedure. Tighten nuts to 8-10 Nm (71-88

...rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. ...

...Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror Removal and Installation Refer to the glass replacement procedures in Manual Mirror for power ...

...rear view mirror is loose in the swivel mount, it is a powered mirror. How do I tighten it up? It is a 2000 Dodge Grand Caravan look under the covers and their is either a screw or a bolt that will ...

...with correct size allen wrench. Next, buy rear view mirror glue kit, at any automotive store, and follow directions. re-attach mirror to plate, once dried on windshield, and re-tighten allen

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...