Questions & Answers for: thermostat 2001 subaru forester

2001 Subaru Outback LTD; 2.5 ltr. Passenger seat heater does not work. I checked the fuses according to the manual, but can't find correct fuse. Fuse panel picture not the same as panel in car. Both ...

2001 Forester overheating I have coolant all over the top right of my engine. The car is over heating. I took it to work with no problems and noticed smoke coming from under the hood on the way home. ...

...2001 subaru forester A lot of suburus have a horizontal engine configuration. This leak could be from a number of places. I would dry all the coolant off that you can see, then let it sit for a while ...

...thermostat its not regulating tempature right I have a 92 subaru Legacy 2.2L a fairly new engine w/ 52k Ive replaced the radiator, t-stat, hoses, water pump. and as I drive my car on my night paper ...

...2001 subaru overheats just driving down the roadand also when airconditioner is on.the only way to get it to not run hot is to turn on heater.has new thermostat,catylitic converters and antifreeze is ...

...thermostat locATION ON A 2001 SUBARU FORRESTER I HAVE A PROBLEM WITH THE CAR OVER HEATING. THERE IS NO SIGNS OF LEAKAGE OR WATER IN THE OIL I THOUGHT MAYBE THE THERMOSTAT MIGHT BE STUCK. I CANNOT ...

where do i find the thermostat on my 2001 legacy? hi thermostat should be between the bottom radiator hose and the engine block in an alloy case, you have to remove the hose to get to it

Overheating problem after thermostat was changed Cars temperature gage was going up and down so I had my thermostat changed 3 months ago. This completely fixed the problem and car was running perfect.

2001 subaru forester. overheat problems. changed head gaskets, water pump kit (comes with all pulleys and new belt. Changed head gaskets, also changed thermostat as well as fan switch. gets half way, ...

...2001 have a computer program built in that if you are over heating it will shut down a couple of cylinders by eliminating the spark or by regulating the fuel going in I had the same problem on a 3.4 ...