Questions & Answers for: tension wiper arm

...the wiper arms away from the windshield because they will not pull off the pivot shaft until the wiper blade spring tension is no longer acting against the windshield. Here's a pic of the lock

Ad

wiper arm tension on 94 Jeep Grand Cherokee there is no tension adjustment if the arm is too loose and dosen't put enough pressure on the windshield you need to replace the arm you can bend the center

Ad

Question about 1993 Crown Victoria

2 Answers

...tension on the wiper arm as well and the shoulder pin connecting it to the wiper motor to see if it is loose. If it is much looser than the passenger side, then put in a new wiper arm assembly. If it ...

...wiper arm into the up position. Seems as though your tension spring may be weak which will cause poor wiping performance. You will have to remove the wiper arm to replace it as it has to be installed ...

...wiper arm away from the windshield. If the tension spring is damaged or broken, the arm will not show resistance. If it is functioning properly, then pull the arm back until the hinge locks in a ...

...wiper arm Release small tab on side of wiper, where it goes over the drive post There is a tool for hooking onto the wiper arm,to hold off spring tension,and makes it easier to position,when ...

wiper arm Now to do it real easy,you buy a tool from Snap-On, you will love It hooks over the end of the arm,you wrap you fingers around the arm, to remove spring tension. Really nice tool and easy to

Question about 1999 Silverado 1500

1 Answer

...wiper blade arms off. need replaced lift the arm away from the windshield. if the tension spring is damaged or broken, the arm will not show resistance. if it is working properly, then pull the arm ...

Question about 2002 Windstar Cargo

1 Answer

...WIPER ARM TENSION HAD WINDSHEILD REPLACE AND NO WIPER IS BLOWING AROUND NOT CLEANING OF WINDSHEILD WHEN DRIVING OVER 45 MPH EVERYTIME A TRUCK GOES BY THE WIPER FLOPS Hello: From your description of ...

Question about 1998 Catera

1 Answer

...now wipers will not go down all the way.They stop half way across the windsheild. pull the arms off the shafts and cycle the wiper motor to the stop position . Replace the arms and tension the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...