Questions & Answers for: telephone wont dial

...Telephone as to connected to dial up modem of the computer if you dont have dial up modem then the faxing wont work......... About Distinctive Ring Pattern Detection (DRPD) "Distinctive Ring" is a ...

...wont work Scenario 2 to 4: Scenario 2) The modem does not have an Ethernet port. The modem is a dial-up modem for traditional dial-up service. To use the Router, you need a cable/DSL modem and ...

wont send or reiceve Check to see if you have a dial tone. If not, plug a regular home phone into the jack in the wall and see if you can call it or dial out. You might have a dead phone line. pick up

...it wont fax says no dial tone Make sure the telephone cable is connected to the correct port on the printer also make sure you are not using the telephone at the same time(if its on the same

...wont receive. So,????? Connect the fax to the correct phone line 1. 2. Setting the Receive Mode- 3. Contact local phone company to check the telephone wall jack for low ring voltage. 4. Connect a ...

...wont allow you to make chioces by pressing the buttons when phoning an automated answering system. In the UK, our telephone networks support P or TB. TB is the most common tone dialing system in use ...

lexmark x7170 wont send or receive fax. Any idea? Was working fine then nothing! Check your phone line by plugging in a spare telephone handset and listen for the dial tone.

wont fax switch on the printer and connect the phone wire then press the fax button check dial tone coming or not if its not coming please check your telephone connection and try again same thing ....

...WONT SET UP EITHER. THIS JUST HAPPENED 2 DAYS AGO, BEFORE THAT IT WORKED FINE. IS IT DEAD Hello. If everything else is working, printing and copying, unplug the printer from the power source. Check ...

...telephone port to your machine and telephoe line. .then load your fax document to ADF. then their is a button in your machine its name ON HOOK DIAL .press it then you can here some dial tone. press ...