Questions & Answers for: stepping motor

Question about 2002 Highlander

1 Answer

Driver windshield wiper does not work HI. This is a possible motor issue. To confirm, use this procedure. it will help isolate the actual issue at hand. Step 1 Make sure the battery has a strong ...

Ad

Question about Bravos 3.8 Cu. Ft. Washer

1 Answer

f 51 error code what does this mean Hi Thanks for using FixYa and I am sorry to hear whatever happened. Error F 51 flashes when there is a motor rotor position sensor (RPS) failure. Please follow the ...

Ad

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

What does F51 mean? This comes up on screen. Also leaks from the bottom. Hi Thanks for using FixYa and I am sorry to hear whatever happened. Error F 51 flashes when there is a motor rotor position ...

Question about Elite Oasis 27052 Top Load Washer

1 Answer

what is code F 51 Hi Thanks for using FixYa and I am sorry to hear whatever happened. Error F 51 flashes when there is a motor rotor position sensor (RPS) failure. Please follow the step by step ...

Question about Oasis HE 27082 Top Load Washer

1 Answer

Wash machine will run for about ten minutes and then will start beeping and flashing F51 Hi Thanks for using FixYa and I am sorry to hear whatever happened. Error F 51 flashes when there is a motor ...

why does blower on A/C sometimes work and sometimes don't on my Saturn 2007 aura Blower motor control processor would be a good guess but I'm not in the guessing business , you need to test power an ...

a/c blower motor works if I pull power and plug back in until I cut engine off. Then I have to repeat process Daryl, You may want to check the blower relay/ just switch with one of same type and try ...

Question about 2003 Silverado 1500

1 Answer

...stepping motor error 'stepper', 'stepping' motor. It is a motor that the motor speed can be varied. Wash, Low spin, med spin, fast spin, clockwise, anticlockwise etc and maintain the same power and ...

Question about 2003 Silverado 1500

1 Answer

process error in phaser6121 mfp printer 1 Check the Engine Control Board connector P/J8. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 ...

still awaiting for a wiring diagram for KD12MM1 How to connect 9 leads out motor step by step 10,791 views • Dec 12, 2020, • How to connect 9 leads out motor step by step about the electric motor. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...