Questions & Answers for: step gas car lights dim

...gas pump humming and all the lights should be on) 2.) press the clutch pedal all the way down (if it starts, then it's fine, if not, proceed to step 3) 3.) release the pedal slowly and just slightly ...

step on the gas and it bogs down. Tune up was done last summer, starter, alternator & battery are all in working order.As I stated, this only happens when it is wet on the roads (when I'm driving it).

step on the gas it will go down to idle and its very shakie and it feels like it wants to die when i put it in reverse or go it will sometimes die or when i stop at a stop light. and the other problem

...gas Good fun chasing this one down.... Died on the side of the road when my wife tried to lower the window. Would not restart. She could not raise the windows before she walked home. Car restarted ...

...gas the truck wasn't accelerating normally then not at all. Before it completely shut down the lights dimmed then it lost all power shutting off. First time it had a problem since I bought it 2 years ...

gas pedal quickly to try to fix it, but no, it didn't help. This car is a nightmare! I have never had so many problems with any cars that I've owned! Never ever again will I buy a Chevy Impala

...gas station and when i was driving, my lights started to get dim, gauges went all crazy, and then it died, acted like the battery was dead..got my buddy there, he jumped it and started right up and ...

...gas and all appeared fine until the engine got warm. The voltage is going from about 14.48 down to 13.05 in a few minutes while the engine is running and stays there. At that time the engine light ...

step on the gas the engine revs up, however when in comes down the battery voltage indicator goes from 14 volts down to 10. The lights dim and the heater blower gets weak, the trucks wants to shut off

...lights dimming. Then the headlights. Turned them off and on. 1 popped up then the other. I stepped on the gas and started noticing it bog out. I released the peddle and then tried to just get it to ...