Questions & Answers for: steering idler arm

idler arm , and tyrod ends and find out whats loose. I would say its either pitmen arm or idler arm. Also chk.ball joints. If you find nothing wrong there the only thing left is the steering gear box

...idler arm is a steering component found on vehicles without rack and pinion steering. Your referring to an idler pulley. To replace: remove the belt, remove the bolt from the center of the pulley, ...

don't know where the idler arm is on a 1998 chrysler sebring convertible It doesn't have an idler arm. It has rack and pinion steering. Rack and pinion systems don't use idler arms.

...Steering components Tie rod ends (F) (See: Tie Rod Ends) Idler arm ball stud nut (J) and discard the nut (See: Idler Arm) Pitman arm nut (H) and discard the nut (See: Pitman Arm) Remove the idler arm ...

...steering designs, the idler arm is a part of the steering linkage that makes the front wheels turn about the same on both sides. Actually, the wheel on the side of the turn turns a little bit more. ...

...output shaft of the steering box on the drivers side, It attaches to the steering linkage. The idler arm is on the passenger side, one end attaches to the frame the other end to the steering

...a 2003 sierra 1500HD, 4wd, 6.0L, crew cab pit man arm to steering gear nut 186 ft lbs. pit man arm to relay rod nut 46 ft lbs. idler arm to frame nut 73 ft lbs. idler arm to relay rod nut 46 ft

steering wheel has to much play Idler arm and or pitman arm most common.could also  be excessive play in steering gear box.Tie rods/center link but usually its my first 2 choices go bad bothe of ...

STEERING BOX AND IDLER ARM WHERE CAN I FIND A STEERING BOX AND IDLER ARM FOR THIS OLDMAN try www.advanceautoparts.com and get it . Otherwise you must go to some junk parts. God bless you

...The Pitman connects the steering box to the steering linkage by/through a ball joint. The idler arm should be on the other side by the passenger wheel. Yep there's a idler pulley and a tensioner ...