...speaker with 12 inch woofers, I put a 120 volt AC, 9 inch, 53 watt fan on top of my receiver that is capable of blowing over 100 CFM into top ventilation holes of my receiver, I was able to crank the ...
...speaker cables go into are unlabled and I need to know what one is which because I have created my own plug and all i need to do is wire the correct cable into the correct socket. Can I please be ...
they use a speaker similar to a 6 1/2 but the bolt pattern doesn't match up, so there are a number of 6 1/2 and 6 3/4 sized speakers that will fit, but you'll have to redrill the mounting screw holes
Question about Ultra M923 Full Tower ATX Case (ULT40125) ATX Mid-Tower Case
...speaker) connector so you have your mobo error beeps which is a good idea. You can also use together with those mobo buzzers a software utility (like the one I mentioned) that loads at startup that ...
...6 - 7 to find the exact light pattern you're observing. The 'fault light' (singular) flashing is not a documented possibility. ...
...Speaker Cover is different in shape.(Strip of plastic below the LCD screen, and above the Keyboard.There are different names for the various models)2) ...
...hole is the Positive connection.The Black wire goes to the outside terminal on the back of the jack.(Negative)Use good de-soldering/soldering skills. Do not make a cold solder joint. (Solder ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions