plugs are in the cylinder head, there are thick wires going to them with a long rubber boot on the cylinder head end, carefully pull the plug boots off, if you damage them you must replace them, under
...to the SPARK PLUGS. trace the four long wires(high tension wires) that goes to the engine, pull the rubber boot and you will see the spark plugs, its kinda deep though so you will need a
...spark plugs located on a 2004 toyota corolla? what is the gap for the plugs? when you open your hood the plugs are facing the fire wall ... the pipes facing you are not the exhaust hedders they are ...
not used for this engine. When you take the big, black plastic cover on top of the engine, you'll see 4 coil packs. The coil packs plug directly on top of each spark plugs. Need anymore help, just ask
...spark plugs, oil,air and gas filters, motor and transmission oils As a rule of thumb, oil and filter every 3000 miles, air filter everyt 20,000 miles, transmission oil every 50,000 miles and spark ...
...specs for 2003 toyota corolla Toyota do not have a specific torque setting for spark plugs in the master workshop manual,they say "hand tight, plus 1/8th turn"(using a plug socket and ratchet
What are the spark plug torque specs for a 2003 toyota corolla? 18 foot pounds
...torque settings for a Toyota Corolla 1995 model 4afe engine TORQUE SETTINGS FOR THE CYLINDER HEAD? PLEASE PLEASE HELP cylinder head bolts: step one: 22 Ft-lbs. step two: tighten additional 90 degrees ...
2004 TOYOTA COROLLA 1.8 ENGINE WHAT IS SPARK PLUG GAP FOR IT According with manual should be between 0,6-0,7 mm You must check with an drill bit with this dimensions 0.6-0.7mm
spark plugs on my 2006 Toyota Corolla Obtain manufacturer recommended spark plugs for your vehicle with proper gap (.044 from toyota forum) 3/8 drive ratchet with extension and spark plug socket. Only
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
