Questions & Answers for: southbridge xbox 360

...Xbox 360 logo. 0000 is also Southbridge related so this pretty much confirms that this is the part that is causing the problems. In order to fix it first do the X-Clamp replacement, you can find a ...

...Xbox 360. After searching for any answers online, all that I have found was "network Port Failure" and something on the DVD drive cable or something. So pretty much, do I need to throw this thing in ...

...360 pros. Hope this helps E-Code / Secondary Errorcode E73 / 1021 Known fixes: 1) Southbridge "X-Clamp"-Fix 2) Reflowing the solder with a heatgun- Southbridge/Ethernet chip area 3) Check the area ...

i have an e73 problem e43 is southbridge/ethernet related. Try reflow the southbridge, if no look try reflowing the GPU, if no luck look for bridged solder points under the ethernet port

...xbox is not connected to the internet This is caused by overheating, a cold solder joint under the southbridge or ethernet chip. Go here to find out more and how to fix it. hi im having internet ...

...error databases it often says it's an ethernet error, it rarely is. More than likely it's the Southbridge chip (one at the top right, silver circle, says MS). The best solution is to reflow the ...

...southbridge reflow (this works in most cases- in the rarest cases you will have to fix the error by replacing the ethernet chip) At the following link you can learn more about this Xbox 360 e73 ...

...xbox 360 and it works fine. Also i have looked at the southbridge and tried this method i found on a website but had no luck. http://www.xboxhacker.org/index.php?topic=13040.0 Can anyone please help ...

XBOX 360 DO NOT DO WHAT warlockoni13 suggested, as doing so will void your warranty. The E78 error is caused by a problem with your dashboard. If you live in the United States, click here to request a

...XBox 360. The stupid thing originally had error 0102, so I reflowed the GPU. Now I have error 1021 (e73) (-_-') I tried to reflow the southbridge as it is likely an ethernet related error, but thats ...