...lamp light indicates that there is a problem with the bulb. Mine did this when I had used the bulb past it's life and the bulb was burned out. Use the owner's manual instructions to remove the bulb ...
...somthing els i have to do or what reset the lamp timer. hold down the menu, down arrow and enter buttons and press power. sharp xr-30x projector power and lamp indicate red and project does not gets ...
i ignored change light warning as the bulb is new but the lamp has closed down how do i reset hold down enter, down, and menu buttons and press power.
...new lamp Have you reset the timer? Reset the lamp timer. ? While simultaneously holding down MENU/HELP, ENTER and R on the projector, press STANDBY/ON on the projector. ? ?LAMP 0000H? is
The lamp indicator blinks to red after i replaced the bulb for a new one. The power indicator blinks green. Projector light don't turn on. PL RESET THE LAMP BYTAKING HELP IN MANUAL
lamp in my sharp XR30X projector, the power light is green and steady, the bulb light is green by blinks in the following sequence: 1 long, 14 short. Do you know what this means? Replace the new lamp,
need to purchase a new lamp xr 30x You can buy online from here or here Concerned, Waqar.
the projector power, lamp temp lights come on no fan Please check the filter door switch or if the fan as if the fan does not work there is an error and so the lamp will not be powered.Check the power
...Sharp XR-30x projector I have all three lights lit up red when I plug it in and I just put a new bulb in did you reset the lamp hours counter ?? see the leaflet that came with the new lamp unit. It ...
Question about XR-30X Projector
...Sharp XR-40X I have followed the instructions in the manual to press a combination of buttons I'm at a bit of a loss as to how to fix this and would welcome any alternative approaches/support! Refer ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions