...the routing of the serpentine belt on 2002 Lasabre limited Go to this ...
...serpentine belt to get for a 1991 buick regal with a 3.8 ltr. My a/c compressor pulley went out. Instead of buying a new compressor, i just want to by-pass it by using a smaller belt. The best way to ...
serpentine belt and see if the whining goes away. It could be the alternator or the water pump if it's driven by the same belt. It will go away while moving because the engine noise is usually negated
...serpentine belt to get the pulley off. Hint. Loosen the bolts on the pulley first. Use a breaker bar to put enough pressure on the tensioner pulley to remove the belt. Then I could see the sensor. ...
whistling noise at start up Replace the serpentine belt, and probably the serpentine belt tensioner too.
...serpentine belt? On my 01 LeSabre, changing serpentine belt is a breeze. Use a 5/8 socket and strong arm on the tensioner pully, rotate towards the back of the car to loose tension on the belt, then ...
diagram of serpentine belt how does it go on ? Here is a picure:
...the car without the serpentine belt that the rattling noise went away. Do you have any ideas what this could be. Thanks Joey So you found the problem Now check all the tension and idler belt ...
serpentine belt on my 2002 Buick LeSabre. (The old one split in half). Everything seems to be lined up properly but when I started the car to check the alignment, I heard a loud squealing noise coming
Question about 2002 LeSabre
parts houses will assist you in getting a short serpentine belt that will allow you to eliminate the compressor with just a shorter belt..(IF the configuration wil allow).. Is your air filter clogged
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions