Questions & Answers for: sears electric oven comes goes

...Sears Customer Service (who seemed to have heard of the problem) and they gave me Kenmore's number. The There is no recall for the oven, but the person on the phone told me there was a design ...

oven control. If you have replaced the element and all wiring is ok then the control is bad even if you hear it clicking. The part # is 74006213 and cost is $298.99 @ http://www3.sears.com/.Part # for

...Sears Kenmore Electric Wall OVen, Mod.#9114012192 purchased in 1993. Set oven for 425 degrees, reaches set temperature, stays on about 10 minutes and temp. display goes out and oven starts cooling ...

...Sears item 02230472000) built-in gas oven offers a feature set that is typical of ovens in this category. You'll find a modern frameless door design and a digital display. Most all products offered ...

...Electric Range Model MER5770ACW. I've tried replacing the touch pad, I bought a refurbished one - didn't work; so I bought a new one (part #74008108) and the F1 error is still coming up. I've tried ...

...sears  repair dept is just horrendous these days, goes with the economy. my clock on my kenmore oven will not set and thus the oven will not work, it clearly states that is the manual. ...

...SEARS) before someone dies in a house fire. Gotta love the name "Spitfire". all a relay is a on off switch. 120v goes into L2in and into a control relay post where it sits sits until  12V ...

...Sears repairman charged $120!!! to make a 15 sec adjustment to the broiler starter in the rear of the oven. We apparently tapped it out of alignment when we shoved a pan too far into the oven. He ...

...sears? If the fuse were blown, You wouldn't even get a display. If you're handy with a multi-meter, and feel somewhat comfortable making electrical tests, the first thing to check is whether the ...

...electric company did one of those blackout things. When the electricity came back on and we set the time, you can barely see the display. Everything else works fine. Most likely the lcd will need to ...