Questions & Answers for: Toyota Camry rods

How to remove the Harmonic Balancer on a 1995 Toyota Camry sedan? 4. REMOVE ENGINE BALANCER (a) Uniformly loosen and remove the 6 bolts in several passes, in the sequence shown. (b) Remove the engine ...

mry LE has a problem with the crank and rod mry LE, with 60,000 miles, has a problem with the crank and rod bearings and possibly the lifter. How much would this cost to fix and is it worth fixing? ...

is there a hood support rod for a 1995 toyota camry, or does it just use the 2 support pistons? The cars with the pistons do not have the support rod feature. If the pistons are weak, they need to be ...

97 a toyota camry do they have replacable inner tie rod ends I have a 97 a toyota camry do they have replacable inner tie rod ends or is it the rack that has to be replaced? they do have replaceable ...

...turn the wheel the tie rod pushes the wheel one way or the other turning the car for you, these tie rods get play in them and cause the wheel to wobble but it wont do any damage to the car itself but ...

what happens if your rods get missed up trying to start it up the rods should not get messed up unless there is a problem with either the rod bolts or rod bearings but if there bent or broke or chiped

how to replace a tie rod on 98 toyota camry With the car off the ground wheel off. Take the cotter pin out from the tie rod. Loosen the castle nut almost all the way. Then with a hammer hit the ...

tie rod replacement on 1994 toyota camry That is an easy job, especially if you have this tool, which is widely available under different ...

rear tie rod adjustment sleeve/pulls to right/1997 toyota when driving the auto pulls to right/I had it looked at & they can't wreck the tie rod adjustment sleeve free to alighn the car are they ...

what is the torque specs for a tie rod end on a 1994 toyota camry front tie rod end torque specs The tie rod end adjusting nut, 54 ft lb or 74 Nm The tie rod end ball joint nut, 36 ft lb or 49 Nm