20 Most Recent 1993 Toyota Camry V6 Questions & Answers


Please try this. Toyota - 4Runner . org Forum > Toyota 4Runner Forum > 3rd gen T4Rs > Programming Instructions for keyless entry remote? Pages (2): [1] 2 » Last Thread Next Thread Author Thread rav04 Junior Member Registered: Nov 2004 Location: Canada Posts: 6 Programming Instructions for keyless entry remote? I have a 1999 4runner LTD, can anyone provide me with the instructions to program my keyless entry remote? Thanks __________________ RAV Report this post to a moderator | IP: Logged 12-31-2004 02:11 AM NoliWan Member Registered: Dec 2004 Location: San Jose, CA Posts: 34 Hey RAV, I got your PM-- Here are the instructions for programming the 99-02 4Runner Keyless Entry factory remotes: 1. Start with the following conditions: you are in the vehicle a. Key is out of the ignition b. Drive door is open ( all other doors are closed) c. Driver door is unlocked (other door locks don't matter) 2. Insert the key into the ignition (don't turn it) and pull it out. 3. Perform these steps within 40 seconds: a. Cycle the power locks 5 times. Use an even pace and try to go relatively fast. b. Close, then open the drivers door. 4. Perform these steps within 40 seconds: a. Cycle the power locks 5 times (same as before). b. Turn the ignition to ON then back to OFF. c. Turn the ignition to ON then back to OFF. d. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should cycle (automatically) indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds: a. Press the LOCK and UNLOCK buttons on the transmitter simultaneously for 1 second. b. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle ( LOCK then UNLOCK) once-- indicating successful programming. If the door locks don't cycle, or cycle twice. Repeat steps 6a and 6b--this remote has not been accepted. c. Repeat steps 6a and 6b for EACH transmitter that will operate the vehicle. Including any old transmitters. 7. Close the driver door. Hope this helps you, it did me greatly-- Good luck, NoliWan __________________ 2000 SR5 4Runner 4WD ____________________ TRD 2nd Gen. Supercharger / TRD Headers / TRD Cat Back Exhaust / TRD Trans. Cooler / TRD Performance Wheels / TRD Boost Gauge / URD Fuel Kit Upgrade / URD 2.2" SuperGrip Pulley / Airaid M.I.T. / DeckPlate Mod.w/ TRD air filter / 1" PP lift springs w/ Bilstein shocks / Brembo Slotted/Dimpled rotors w/ TRD brake pads / Carbon Fiber dash trim / 60XT PIAA Ion fog lamps on manik grille guard w/ PIAA super extreme H4 headlight & H3 foglight bulbs. / Optima 34R Red Top... Last edited by NoliWan on 12-31-2004 at 07:26 AM Report this post to a moderator | IP: Logged 12-31-2004 06:47 AM Serge Junior Member Registered: Jan 2006 Location: Kyiv, Ukraine Posts: 14 Mr. NoliWan, This was amazing Thanks to instructions provided by you I managed to reprogram my new remote in just 10 minutes. Thanks again. Report this post to a moderator | IP: Logged 01-25-2006 09:16 PM trd_style JDM Style User Registered: Sep 2005 Location: Oklahoma City, Oklahoma Posts: 470 HMM!! This thread should be a sticky!! __________________ 1997 Toyota 4Runner 3.4L V6 Report this post to a moderator | IP: Logged 01-25-2006 09:34 PM voltageGSR Member Registered: Dec 2004 Location: Detroit, MI Posts: 43 very helpful I got through all the steps multiple times but when I get to 6B - it cycles twice; i close the door, and the remote doesn't work. i thought maybe battery..on teh remote, etc.. seems to be ok. Wondering where I'm going wrong? I have a 2001 t4r; remote FCC ID is: 1512Y looks identical to the one I lost..but is this not the right remote? thanks guys! __________________ 2001 Toyota 4runner SR5 4x4 Report this post to a moderator | IP: Logged 06-13-2006 12:52 AM uwgrad97 Member Registered: Apr 2006 Location: Seattle, Washington Posts: 60 That's the same remote I have for my '02 Sport. If you're doing the steps correctly, maybe there's something defective with that remote. Report this post to a moderator | IP: Logged 06-13-2006 02:16 AM voltageGSR Member Registered: Dec 2004 Location: Detroit, MI Posts: 43 i bought it from an ebay member who says it works. plus it seems to respond to the remote; but it cycles twice indicating that it didn't take... any hints? I did the steps several times; I think I am doing it correctly.. __________________ 2001 Toyota 4runner SR5 4x4 Report this post to a moderator | IP: Logged 06-13-2006 11:13 PM voltageGSR Member Registered: Dec 2004 Location: Detroit, MI Posts: 43 any suggestions? seems like the right remote - just unable to pogram correctly? could it need a new battery? seems to respond to the system - ..so didn't think that could be the issue. __________________ 2001 Toyota 4runner SR5 4x4 Report this post to a moderator | IP: Logged 06-16-2006 01:05 AM fooldall Junior Member Registered: Jan 2006 Location: Posts: 21 Does this work for a 1997 as well? I just ordered one for my VIP system on my 97 Limited... Report this post to a moderator | IP: Logged 11-03-2006 02:04 PM pat161 Senior Member Registered: Dec 2004 Location: Central MA Posts: 540 I think the remote you need depends on whether or not you have the alarm. The 1512Y did not work on my 02 Sport w/o an alarm. I needed FCC ID# HYQ12BAN. Hope this helps. Report this post to a moderator | IP: Logged 11-07-2006 11:48 AM BoulderZJ Junior Member Registered: Jan 2004 Location: Boulder, CO Posts: 12 This is amazing. I thought my remote was dead, turns out it had just lost it's programming from the dead battery. I followed this and had it fixed in 15 seconds. Yet another reason I'm glad I got rid of my Jeep. Thanks for the help NoliWan. __________________ 2000 4Runner Limited Alpine 7998, XM, MB Quart reference series all around, Rockford amps and subs Report this post to a moderator | IP: Logged 11-11-2006 08:48 PM mryuk81 Junior Member Registered: Nov 2006 Location: Posts: 4 a. Cycle the power locks 5 times. Does this mean lock/unlock 5 times? I am really unsure. Here is some history: Actually, I didnt buy a new remote. Mine stopped working. I have an 02 T4R. Last week I noticed the *chirp* sound wasnt working any more. Over the weekend... the Keyless Remote stopped working totally. So I radio shacked a new battery in the remote... but it still does not work. I tried these reprogramming instructions, but they do not work either. "Within 3 seconds, the power door locks should cycle (automatically)" This doesnt happen. So I am wondering if I am doing the cycle correctly ... Any Advice would be appreciated. Last edited by mryuk81 on 11-20-2006 at 06:20 PM Report this post to a moderator | IP: Logged 11-20-2006 05:43 PM mryuk81 Junior Member Registered: Nov 2006 Location: Posts: 4 Anyone have ANY ideas ? I have tried this possibly 30 times and it has never worked. Could it possibly be something else wrong ? like a fuse or something? ANY Ideas ? Last edited by mryuk81 on 11-21-2006 at 07:29 PM Report this post to a moderator | IP: Logged 11-21-2006 07:07 PM swtrader Junior Member Registered: Dec 2006 Location: Posts: 3 Programming w/ an alarm I have an alarm on my car that the dealer add. It turns on when the driver door is locked. I can't do the steps with out setting off the car alarm, specifically the close and open the drivers door step. Has anyone seen this problem and have a work around? Report this post to a moderator | IP: Logged 12-14-2006 04:52 AM techno WTF Mate? Registered: Oct 2006 Location: Pittsburgh Posts: 828 quote: -------------------------------------------------------------------------------- a. Cycle the power locks 5 times. -------------------------------------------------------------------------------- Yes, this does mean lock then immediately unlock five times. So it will be locked 5 times and unlocked five times. If you were doing this and the vehicle wasnt doing the automatic cycle thing, then there must be a problem with the computer and not the remote. quote: -------------------------------------------------------------------------------- I can't do the steps with out setting off the car alarm, specifically the close and open the drivers door step. Has anyone seen this problem and have a work around? -------------------------------------------------------------------------------- After you do the lock/unlock cycle thing, the doors should all be unlocked, so your alarm shouldnt be going off. Does your alarm always activate when the unlocked doors are closed? __________________ '00 SR5 4x4 ARB Tundra/OME 32" Muddies n'stuff Report this post to a moderator | IP: Logged 12-15-2006 05:05 PM Advertisement Sponsored Links Ads by Google Supporting this site Also, check out these sponsored links: More Links: All times are GMT. The time now is 10:42 AM. Pages (2): [1] 2 » Last Thread Next Thread Show Printable Version | Email this Page | Subscribe to this Thread Forum Jump: Please select one: -------------------- Private Messages User Control Panel Who's Online Search Forums Forums Home -------------------- Toyota 4Runner Forum-- General Discussions-- 4th Gen T4Rs-- June 2009 T4ROTM-- 3rd gen T4Rs-- Classic T4Rs-- 5th gen T4Rs-- Gallery-- Audio & Electronics-- Off-Roading Stuff-- Comparisons & Reviews-- Accessories-- Special Accessory Offers-- Performance Zone - Tires, Wheels, Exhaust, Superchargers, and more!-- Pimp Zone-- Detailing-- Maintenance-- Problems & Warranty-- Classifieds - buy & sell anything related to the Toyota 4Runner (no commercial ads please)-- Polls-- Off Topic-- Dealers - Your Experience-- FJ Cruiser-- Lexus GX470-- All Other Toyota & Lexus Vehicles4Runner Clubs-- American T4R Clubs (click to view)---- Florida---- Georgia---- (The Rest of) The Deep South---- So Cal---- No Cal---- Pacific NW---- Southwest---- Texas & Oklahoma---- Carolinas---- Maryland / Virginia / WV / D.C.---- Northeast---- New England---- Great Lakes---- Ozarks---- Heartland---- Mountain---- Alaska & Hawaii-- Canadian T4R Clubs (click to view)---- Montreal / Quebec---- Toronto / Ottawa / Ontario---- Edmonton / Calgary / Alberta---- Vancouver / British Columbia---- Winnipeg / Manitoba-- European T4R Clubs (click to view)---- UK---- Germany---- Italy---- France---- Russia---- Scandinavia-- Asia & Oceania T4R Clubs (click to view)---- Japan---- Australia---- New Zealand---- Guam-- Africa & Middle East T4R Clubs (click to view)---- Nigeria---- South Africa---- Egypt-- Latin America T4R Clubs (click to view)---- Argentina---- Brazil---- Mexico-- T4R Meet Announcements & Info-- T4R Meet Pictorials & WriteupsSite relatedAnnouncements - Terms & Conditions of Use - Privacy StatementSoftware Related Questions & AnswersComments & SuggestionsLinks Rate This Thread: Select a rating... 5 .. Best 4 3 .. Average 2 1 .. Worst Forum Rules:You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is ON vB code is ON Smilies are ON [IMG] code is ON < Contact Us - Toyota - 4Runner . org Forum > Powered by: vBulletin Version 2.2.8 Copyright ©2000 - 2002, Jelsoft Enterprises Limited. ***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota? name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***

1993 Toyota... | Answered on Jul 14, 2018


Hi. Thanks for your question. For issues related to breaks on 1993 Toyota cramy you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

1993 Toyota... | Answered on Apr 08, 2018


DO NOT PLAY WITH SYSTEM ITS DANGEROUS take to air con dealer to diagnose the problem i worked on car aircon systems and have seen many accidents the only way is to check the high and low pressures ifits got the old r12 then it may need converting to hc134 refridgerant

1993 Toyota... | Answered on Feb 10, 2018


The fuel pump is in the fuel tank.

1993 Toyota... | Answered on Jan 26, 2018


have the fault codes read
indicates an EVAP venting problem or vacuum leak

1993 Toyota... | Answered on Jan 20, 2018


Every time you sync your iPhone with iTunes, if the auto-sync option is on, iTunes will create a backup for you. And the backup is saved on your computer. According to different OS, the location is different. Learn specific information about where is the iTunes backup located - location of iTunes backup.

1993 Toyota... | Answered on Jan 18, 2018


1993 toyota camry Here's this link that can help you solve your problem. Al the best, friend.

1993 Toyota... | Answered on Dec 20, 2017


These issues are unrelated. The input air temp sensor is indicated by code 24. That sensor is integrated with the airflow sensor. I don't remember which pins, but you can find info online. Che k the connector and wiring first. Tne sensor is expensive. For the overdrive issue, do you have clean fluid? You can try some additive.

1993 Toyota... | Answered on Nov 06, 2017


There is a switch in the airflow meter that keeps the fuel pump relay closed as long as there is airflow. With the meter unplugged, the pump should not run except when the key is turned to start. It would seem to me that you have a wiring issue. Try jumping the fuel pump relay so the pump runs whenever the key is on. (Remove the relay and jump the pump wire to the accessory wire--see top left diagram.) This defeats the safety feature but will keep the pump running.

0900c152801cce3c-khhlhgabxhi45qdlqmlsiuhd-5-1.gif

1993 Toyota... | Answered on Oct 30, 2017


It could be something bigger $ like rings or valves but first check your spark plug wires and plugs. There is a chance you have a crack in one of the wires that ends up shorting out or a plug that is fouled - dirty just enough to cause problems. If so, replace them. Given what you said - sitting for a couple days and may have problems, that is a bit concerning if it's consistent meaning each time it sits for a few days you have the problem but when you use it each day, no issue. If it's that way, you should take it to a repair shop and have the compression checked on each cylinder.

1993 Toyota... | Answered on Aug 24, 2017


power to radio might have been interrupted and now it has to be reset. Get code from dealer.

1993 Toyota... | Answered on Aug 23, 2017


I have a 94 Camry which did this. There were no trouble codes stored in the ECM to give me a clue either, but that is still the first thing if you have not done so already - get a readout of trouble codes if any. In theUS Autozone will do that for you.

What it was in my 94, was the ECM itself had become faulty,. It had to be diagnosed by swapping in a replacement. If you do so, get one from a wrecker, with a short-time guarantee, for the exact same engine and transmission.

1993 Toyota... | Answered on Aug 05, 2017


tacho wires go to distributor or coil connection so trace that connection to see where they go

1993 Toyota... | Answered on Jul 16, 2017


Check the connection of the negative to the chassis of the lighting system

1993 Toyota... | Answered on May 30, 2017


Sounds like you should not be driving the vehicle at all until the issue is rectified.

1993 Toyota... | Answered on Apr 15, 2017


I have a 1993 toyota camry , when it start it , it runs for about 2minutes and shuts off,can u help me with that problem.

1993 Toyota... | Answered on Mar 31, 2017

Not finding what you are looking for?

1,389 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,794 Questions

1994 Toyota Camry
1994 Toyota Camry

1,723 Questions

1998 Toyota Camry
1998 Toyota Camry

1,525 Questions

2002 Toyota Camry
2002 Toyota Camry

1,266 Questions

1996 Toyota Camry
1996 Toyota Camry

1,111 Questions

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Camry Toyota

  • Camry Toyota

Most Popular Question

fun running very slow lead overheating

  • Cars & Trucks
Loading...