Questions & Answers for: reset uniden bearcat scanner

...Uniden Bearcat BC 147 XLT will not broadcast. I have unplugged and reset it and installed new codes but, still nothing. What can I do? Frequency coverage for the BC147XL cuts off at 512MHz, so all of ...

...uniden bearcat bc760xlt To RESET your scanner: - Power it OFF - Press and hold the 2, 9, and MANUAL keys and power the scanner ON This procedure will erase all programmed frequencies and return the ...

Reset a uniden bearcat scanner BCD 396xT Want to restore to factory settings and reprogram The general reset is press 2-4-9 together while turning it on. The second way is to press an hold down the ...

...won't let me program it. It used to be that you could reset a Uniden scanner by holding down the #2 and #9 buttons while turning on the radio - that MIGHT do a factory reset for you. Let me

...reset my Uniden BC75XLT Bearcat Scanner . Resetting the Scanner If the scanner's display locks up or stops operating properly, you might need to reset the scanner. CAUTION: This procedure clears all ...

How do i reset a uniden bearcat handheld scanner model bc6oxlt-1 you should be able to find what you need in here: http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/BC60XLTom.pdf

reset the memory on a uniden bearcat ubc360clt ive messed up the memory and scanner is scanning everything but what i want it to want to reset the memory to before i bought it which was today help not

...reset uniden bearcat bc355c. To factory settings? SOME, of the Bearcat radios you could hold down the "2" and "9" button while turning it on - worked on the old units; I don't know about the newer ...

...reset on Uniden UBC125XLT SCANNER Scanner is a UBC 125 XLT Maybe this manual would help? Hopefully it is what you are looking for? ...

Uniden BC340CRS Owner Manual Resetting the Scanner (Clearing all Memories) To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner.