Questions & Answers for: replacing side light 2006 land

...Replacing the strut is easy 45min job even for a novice mechanic, and you can do it yourself. Strut can be found new for approx $750 online. If you are fed up with air suspension issues, there is a ...

...side is fully blown (hard to the touch). Don't know if it is related to the following: The next common fault in these systems is called shuttle valve failure. The shuttle valve is a part of the brake ...

...side without removing the grill, release plug latch to remove plug and short out the two pins of the plug then tape to secure. I can now lock the car without the horn blowing. As for replacing the ...

light has been activated, the pad wear sensor must be replaced. CAUTION:To avoid accidental operation of the Electric Parking Brake (EPB) andpossible damage to the EPB actuator, remove Fusible link 8,

...light to see and the 2nd person with the hose it may be coming from elsewhere on the vehicle as it takes a long time sometimes for the water to reach its destination ... start at the lowest spot of ...

bulb is new when the car is park all the lights work until I press the brake and then the driver side brake light goes off its a new bulb The replacement lamp could be defective or installed backwards

...light when in park the rear brake lights work when I press the brakes the drivers side bulb goes out it is a new bulb why? Possibly wrong bulb? Check you havent replaced a single contact bulb with a ...