...your Question and Good Luck Negative battery cable. Serpentine drive belt. Raise vehicle and suitably support. Right front tire and wheel. Inner fender splash shield (right side). Flywheel
...Replacing the serpentine belt is as simple as threading it into position, cranking the tensioner and slipping the belt over the tensioner pulley, or nearest pulley up top. Belt tensioners are mostly ...
...serpentine belt off and inspect all of the pulleys on your serpentine belt drive. Make sure nothing is sticking, if it is, replace the colporate immediately. This could explain the jerking motion you ...
serpentine belt? to change belt you have to look under car and remove the long bolt that goes all the way through it is located on the passenger side .once u loosen the belt and try to take it off you
easier when replacing the bolts. Also, I suggest loosening the 4 bolts that hold the water pump pulley on before removing the serpentine belt.
...serpentine belt?? 1995 Park Avenue with Stage 2 engine. When I went to pick up my car I got back one that I really do not want to drive across the street. Will post what it does, but am interested if ...
...belt I would consider taking it into an auto repair shop. I wouldn't recommend trying to fix it yourself; chances are you'll only make it worse. It's even possible that you'll hurt yourself. Having a ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions