Questions & Answers for: replace front headlights bulb 1998

...replace it myself and the new bulb does not work. Now my high beam is not working either. What is the problem? MAKE SHURE YOUR GROUNDED AND THE BULB IS IN RIGHT SOME BULBS YOU CAN NOT TOUCH WITH YOUR ...

...replace a front headlight bulb on 2001 acura 3.2 TL Ive remove everything it's just a silver metal piece that confuses me it hold the headlight retainer in place Are you talking about the retaining ...

...replace a front headlight bulb on 2001 acura 3.2 TL Ive remove everything it's just a silver metal piece that confuses me it hold the headlight retainer in place How do I replace the low beam bulb in ...

...bulb on 2001 Acura 3.2 TL I am trying to change the right low beam HL bulb on my 2001 Acura 3.2 TL, there is a plug i can get of, then it looks like a metal retainer that i cant get at the screw that ...

...screws on top...when the headlight assembly comes out unclip the harness from the bulb assembly. Pull the bulb out and replace...don't touch the halogen bulb with your fingers...just the plastic

...REPLACE MY 2003 ACURA TL DRIVER SIDE HEADLIGHT LOW BEAM BULB AND THE LIGHT IS STILL NOT COMING ON I WAS TOLD THAT THE INVERTER ON IT IS BAD OR THIER IS A WIRING PROBLEM. HOW DO I GET TO THE INVERTER ...

...headlights went out same time . bulbs are good . fuses are good. back lights work and high beam works too. what else can it be? and is this common with these cars . 1998 acura 2.5 tl year is 1998 not ...

acura TL http://www.acuraworld.com/forums/f47/2001-tl-headlamp-replacement-procedure-92343/ hello, open the hood find head light and go to the back of your headlight, there should be a clip that holds

...bulb 2001 3.2 TL. Alldata says that you need to remove the front bumper. I saw a posting that said you could reach the headlight unit from the wheel well - removing the wheel & well cover. I will ...

...bulb is changed, check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need ...