Kia rio front seat removal I'm replacing seats in my '01 Rio with the seats from my '04 Rio parts car, and can't seem to find a socket that fits the bolts perfectly. Does anybody know the size of the ...
how do i change a front wheel barring in a 2001 kia rio Remove the wheel, remove the cap, remove the pin pry out the bearing, make sure you repacek the new bearing with wheel bearing grease.
Should I re-torque my axle nut a certain amount time after replacing the front bearings pn a 05 Kia Rio? Shouldn't have to.
front wheel bearing a combined total of 12 times and it only has 81000 miles on it. one are the other goes out about every 10000 miles.can we replace the older axle which is two piece knuckle with the
kia rio for the connecting rod bearings and main bearings TORQUE SPECIFICATIONS kia rio Cylinder Head Bolts: (21.7ft.lb) or (3.0kgf.m) 90?? Loosen ?(21.7ft.lb) or (3.0kgf.m) 90? Main Bearing Cap Bolt:
front wheel bearings require scheduled replacement? Thank you Not normally, they are replaced on an as as when basis. Checked during service, if found to be loose/failing, then replaced. Also replaced
Question about 2001 Rio
I have both front wheels off of a 2001 Kia Rio and want to why only oneaxel turns? Put it in neutral. Its a front wheel drive. Or a locked up brake. Or locked up wheel bearing
how to remove a front wheel bearing on a 2001 kia rio Does 2001 kia rio need to have a spacer for the driver side wheel bearings
Question about 2002 Rio
...front whel bearing how do I determine what size bearing spacer I need when replace wheel bearings when you buy the new bearing it will have everything included Not having more info on your problem, I ...
Question about 2001 Rio
if not replace them. O2 sensor is located in the exhaust pipe between the motor and the catalytic converter. The front O2 sensor runs the engine and the after cat converter monitors the cat converter
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions