Questions & Answers for: replace brake light switch 2000

Question about 2000 Jimmy

3 Answers

...brake lights. The center light comes on when I apply the brakes, but the left and the right do not. The back lights come on when I hit the keyless entry but not when I hit the brakes. I checked the ...

Ad

...of these. it is the multifunction switch under steering wheel cover.the third brake light is on different circuit .so replace muti switch and you will fix your problem thanks please rate this ...

Ad

...lights don't work...my tail lights work fine i just have no rear blinkers or brake lights, brake lights and turn signals work off the same curcit, it could be the fuse or the brake light switch

Question about 2000 Savana

4 Answers

...brake light as well? Does it work? Quinn , Arizona How many light bulbs total are in each tail light lens? Check the fuse. If the fuse is good then replace the bulbs. I had same problem in my GMC. ...

...brake light switch. have running lights,turn signals, hazards. no alarms of any kind. all light wiring is ok. check the fuse and maybe adjust the rod coming to the switch youdoit.com Check the

brake lights won't come in in the left and right light assembly, turn signals and tail lights work fine, light bar over the hatch also works for the brakes. The car is a 2000 gmc jimmy. what's wrong? ...

replace fuse. It may look good but I've seen some that were burned out of inspection view. You might also want to trace wiring back to brake lights, just in case snow or build up pull connectors apart

Question about 27699B Black Knock Down Brush Guard GMC Sierra 3500 200

2 Answers

...brake light switch for a 2000 GMC 3500 I want to install a trailer brake switch on my 2000 GMC 3500 truck. its located at the top of the brake pedal arm Just go to that adress ...

Question about 2000 Safari

1 Answer

2000 gmc safari van brake lights can't get brake lights to work What have you done to try and correct this? Has the brake light switch been tested? Are the fuses OK?

...BRAKE? Do you have failure codes? Take to reliable repair shop for answers. You can replace the converter if you wish and it may or may not be the problem and if not then your time and money is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...