Questions & Answers for: remove vent cover ge profile

remove upper vent panel and remove inner filter (same directions for just replacing inner carbon filter): Then, remove inner plastic grille (2 screws) and final screw on left side of metal "air duct"

vent grate 2. remove the small black plastic grille behind it 3. lift the metal plate up, reach in and remove the metal bracket that doubles as the lamp housing 4. you can now remove the bulb from the

...vent door then you do not have to take the unit down. Unplug the unit. Remove the top three screws over the center of the louvre and then carefully lower the vent louvre. (Lowering helps me get a ...

...vent with two screws. Remove the forward screw and then pull from the top of the vent to access the rear screw. Now you have access to a metal plate above the fan assembly. Remove the screws at the ...

remove the grille (vent cover) from the top of the unit. There are two screws on the top edge that you have to remove. Then slide to the left because there are some plastic tabs that fit into slots on

vent installation is blocking the flap. You might have to remove the unit from the wall (two people to do this) or disassemble the vent duct above the microwave and rework the interface for clearance.

...vent fan cover? the plastic has broken in several places and it has fallen off well you could try SEARS to see if they can help, ( if you own a bank) or as no one said it has to match the model you ...

...ge profile spacemaker oven is leaking water(?) i removed the metal filter and the liquid appears to be coming from inside. there is a metal "plate" about 1 inch above the filter and the liquid is ...

...GE Profile spacemaker 2.0 microwave. Model #JVM2070WH01 manufactured 9/2005. Vent, boost and lights work but rest of keyboard doesn't work. How can we fix it? When certain buttons function yet ...

...vent grill and remove it.          2. Unscrew the 1 screw above the computer keypad, then slide it up to unlock it and it will hinge down, revealing the ...