...remove the front axle shaft to replace the ujoint. this is on a 1994 Wrangler Remove the brake assy. Remove the rotor. Remove the big axle nut. There should be 3 bolts that hold the hub bearing assy ...
Question about 1992 Wrangler
...front axle in our YJ's are dana 30 with a high pinion! The high pinion make the ring and pinion spin in a reverse rotation from the dana 30 found in CJ and TJ Jeeps. When Chrysler designed the YJ ...
...front axle housing seal leaking. How do I replace remove axel with screwdriver pry seal to replace place seal on housing and tap with hammer and socket that will fit on seal. then assemble all parts ...
...Remove front wheels. Scribe alignment marks on propeller shaft and axle yoke for proper assembly, then disconnect propeller shaft at axle yoke. Disconnect connecting rod at steering knuckles. ...
...is the problem If you have an actuator box on the passenger front axle that may be disconnected or broken. If not remove the cover from the front differential and check the gears...they may be
...front end remove the vacuum hose from the shift motor on the front axle.with the vehicle running,(be sure to set parking break and /or chock tires.) place your finger over the end of the hose check ...
...front axle joint? If so, put the wheels back on but remove the cotter pin from the axle end your are working on and remove the wheel center cap. Once on the ground, put a socket on the axle nut and ...
...with the vehicle on the ground. If you can, you should remove the cover and take a look at the gears. Also, if there is a control unit on the passenger front axle, make sure that is working as
Question about 2004 Wrangler
...remove the front and rear drive shaft parts that connect to the pumpkin, Step 2- Grab the spinning part the comes out of the pumpkin and spin by rand for a while, changing directiona and speed ...
...to use a 371 precision universal joint product super strength heavy duty high performance joint how do I remove the universal joint left front and right-front is it on the front driveshaft or ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions