Questions & Answers for: rear caliper jimmy

rear brakes will not completely disengage. With the vehicle up on jack stands and transmission in Neutral you can barely turn the wheels with no brake applied. Help?? your inside pad wore out first do

Ad

...rear disc brakes I removed caliper and lock washers and i can't get rotor off to replace it do i need to undo parking brake and if so how . spry some of bp blaster or WD-40 on the rotor then use ur ...

Ad

...rear just changed pads and roters 2000 jimmy You need to make sure the caliper pieces slide freely on the pins and the piston also moves freely. I just did my daughters GM car. I had to pull back the ...

...OR SCORING ON THE ROTORS. The caliper pistons can be sticking. By flushing out the brake fluid on both rear calipers may correct your problem if contamination is removed by bleeding the rear ...

...rear rotors on my 2001 gmc jimmy. I already removed the caliper, brake pads and caliper bracket. Are there more bolts i need to remove or do i simply need to beat the rotor off? smack it hard with a ...

...rear passenger side is going thru brake pads like water. I would like to know what to look for and what to do to stop it. Your brake caliper needs to be changed it is sticking, and is applying the ...

Question about 2000 Jimmy

1 Answer

...rear passsenger disc brake is going thru brake pads like water. I would like to know what to look for to fix the problem. Sounds like the pistons are sticking in the calipers. Also check the brake ...

Question about 2001 Jimmy

1 Answer

...rear of my 2001 jimmy now the brakesare sticking after a few minutes they release but not fully .It s driving me nutz Did you caliper grease on the sliding pins? If the pins are dry the calipers will ...

Question about 1999 Jimmy

1 Answer

...hard to take of when attempting to accelerate. You have a caliper sticking or a problem with your rear brakes. This could be the caliper, a bent Brake line, a bad Master Cylinder or a bad ABS

...rear pads were stuck against the rotor Ruined pads and rotor. Replaced all of thepads and all 4 rotors, bled system. Now the left pads are still sticking to the rotor after the brakes are applied. Do ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...