Questions & Answers for: radio knob broken

...broken wires to the knob have come unsoldered.etc. If you have replaced the old knob with a new one,and is an exact same type with same wiring points. you can easily resolder to the orginal areas and ...

...knob from radio shack - replacement knobs. it may not have the markings you desire but at least you'll have a knob you can rotate. want to order knob for lid on rival corckpot model scvs605 A typw ...

...knob has also broken. How do you remove that darned oval panel to look at the dials, or radio. radio has 4 holes in front cover 2cloths hangers work well when cut to fit in holesinsert about 3 inches ...

...radio volume know I need to remove the center part of the volume knob to replace, how do you get that out? You should be able to pull the knob out straight. If the knob is broken then you should be ...

...radio and identify the item Replacements available on the Internet (Ebay, Maplins , Radio Shack etc) Press the knob in like a push switch. You should feel a click. This should turn the radio back

...knob on cobra DX IV cb radio it really loose and can move in and out real far and its hard to change the channel. any way i can fix that? Remove the outer knob, you may have to remove the front plate ...

Radio and all controls work fine. But turning knob no longer moves needle along the spectrum to tune in frequencies. Since most radio's have digital displays these days, to have a pointer move along a

Grundig Satellit 1400 shortwave radio Cannot move station indicator, but control knob moves Station needle indicator not moving. Knob moves o.k A broken belt?

...radio with a broken knob You can buy generic replacement knobs at an electronics store (for example, Radio Shack comes to mind). Disclosure: I am not affiliated with or employed by Radio Shack. Or, ...

...radio has programmable squelch. It is accessible through the software. However, if the squelch knob (pot) has been broken, it must be fixed or replaced. Move the control knobs back and forth, do ...