Questions & Answers for: put freon 150 truck ac

Question about 2004 Galant

2 Answers

...150 and a little elbow grease is much cheaper. Make sure you have all the right tools to fit. If you have a Galant that is 1 to 13 years old don't worry about the refrigerant because it takes the new ...

Ad

...freon in my car. Please if you can include this chart to [email protected] Thank you so much. Peter It should be directly in front of the firewall on the mid-left side from the frontal perspective ...

Ad

Question about 2006 Forenza

2 Answers

...want to mix freons if your car takes R134a freon that is what you want to put in it. unless you have re-engineered your A/C system to something else. good luck and let me know what the out come is ...

Question about 1988 F 150

1 Answer

...can be causing this problem put 12v straight to the compressor if the clutch ingages comp is good turn ac on is it stops then you are low on freon jump the short cycle switch & charge the ...

Question about 2002 Maxima

1 Answer

...put ac gas Easiest way is to purchase a kit from your local parts store. A kit usually comes with one or two 150 ml cans of freon and a hose kit with gauge (plus instructions). The cost should be ...

Question about 2002 Maxima

1 Answer

...put out cold air. I check the presure with a gauge and it at 100 psi which is too high. I recently had to install a new Ac control unit from my dash board bcuz the other one wouldnt work. I am not ...

...put it back in,and freon it up again,this will fix the problem.The freon leak will most likely be the compressor,it was a bad design,the ht6,and they leak at the seams.I hope this was helpful,and be ...

Question about 1999 Blazer

1 Answer

...inside vent, place the fan on low, temp coming out of the vent should read around 45-50 at idle, now if you have to add freon that means you have a leak, put dye in the system, and check for

...freon pressure up to say 150 or 200 psi.  And the compressor clutch has to have voltage to engage the clutch.I wonder if the clutch is going and needs 14 volts instead of 12 to engage ?  Or ...

put a new ac compressor in the evac and charge done by a pro shop. I didn't use it for a couple of weeks. I turn it on . In about 30 sec. it began to make loud pops I looked under hood and saw that it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...