Questions & Answers for: projector overheating fix

Projector overheating and turns off after 20 mins Quick Question oh mighty one, 2810 Compaq projector, manufactured 12/5/01. Overheating and turning off itself. Cant find a person to fix it in Ireland

Projector overheating and turns off after 20 mins Quick Question oh mighty one, 2810 Compaq projector, manufactured 12/5/01. Overheating and turning off itself. Cant find a person to fix it in Ireland

...Air-Intake Side of the Projector, connected 12V Power and viola - no overheating anymore. It's very loud but i got my Projector in an extra Room in my Basement-Cinema. So noise is not an issue for

...overheating, blow out the projector with canned air. excessive dust keeps in the heat that the projector is trying to expell. also, make sure all of the fans are working properly. if it's cleaned out ...

...projector has been overheating the last 6 months. projector has been overheating the last 6 months. Never had this problem in 3+ yrs of use. No dust in vents, projector is never out of case except ...

projector powers up but turns off after 1-2 minutes There ar a few reasons that will occur. The main two are, If there is no signal and if it is overheating. If there is no signal. that is an easy fix

Toshiba projector amber light keeps blinking and lamp does not come on. it seems like it is overheated. make sure nothing is blocking the fans. even if the fans aren't covered, it seems like it was ...

my projector is overheated with temp light flashing. how can I fix it? If only the TEMP light is flashing, then it means the fan has broken down. You will need to send it to Dell to get it fixed.

overheating problem. The problem is, the bulb gets really, really hot when using the projector. It doesn't matter whether it has been there without any usage. As you switch it on, it will start to

projector shuts down after about an hour. It seems to be overheating. I put a new lamp in, but it does the same thing. Is there a fix for this projector? A cap or something I can replace on the board?