...printhead light begins to blink, reinstall the ribbon and close the printhead. The printer may or may not print out a ribbon sensor profile, this is normal. Cycle the power and you should be good to ...
...printhead light blinking reinstall the ribbon and close the printhead. The printer will autoclaibrate and run a sensor test. Once complete the take up motor should have turned on and you should be ...
printhead light is flashing not sure why and accnot get it to stop - please advsie how to solve this blinking light problem ? the light indicator on the machine blinks one (1) green and then (six) ...
...printhead issue my zebra 105se has ablinking printehead light - it blinks steady orange color light and nothing is happening on the printer - media does not advance ? The controller thinks the ...
...printhead light is blinking yellow what could this mean? I have tired replacing printhead and two board inside of printer (one smaller board that printhead wiring connect to and larger board that ...
...light The printer it is in error state? Any other LED it's blinking or lighted? Do you have any message on display? Please verify if the supplies are on the correct path. Do you use adhesive labels? ...
...blinking or lighted? Do you have any message on display? Please verify if the supplies are on the correct path. Do you use adhesive labels? Verify if there is any label (or pice of label) stiked on ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
