...mag by porter cable Porter cable parts are available at www.toolpartsdirect.com. I believe that the part you need is also available by itself and in a repair kit from your local dewalt repair
Question about FR350A Factory Reconditioned 3 1/2" Round Head Framing Nailer Kit, 70 120 Psi
...porter cable framing nailer and it leaks air. I can here the air coming out of the top where the air exhast is. Please help. my email adress is [email protected] Thank you Sometimes when the air ...
Question about FR350A Factory Reconditioned 3 1/2" Round Head Framing Nailer Kit, 70 120 Psi
...Porter and Cable Round Head Framing Nailer, Model FR350A. I am now losing air pressure through the exhaust of the rear of the nailer. I think I have blown a O-ring as i later found out that the ...
Question about COIL350 3 12" Magnesium Framing Coil Nailer
Porter cable 350mag framer pin wont go back in and air coming out of the exhaust...It is brand new I used it on a deck today and this happened!!! FIRING VALVE IS STUCK IN OPEN POSITION, FIRING ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
Porter Cable FC 350A framing nailer and the add said it handle 28 degree nails. However when I load them in the nailer it shoot one nail then it jams. The manual for your gun specifies 34-degree nails
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...porter cable framing nailer Needs to be rebuilt. You can buy a seal kit from PC that will fix your issue. Then, you might want to check your pressure settings on your compressor (if you dont have a ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...Porter Cable FC350 34 degree nailer? Yes, you can use 30 degree clipped head nails in the Porter-Cable FC350 framing nailer. The FC350A and FC350B nailers are newer models that specify the 30-34 ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
my porter cble framing nailer pushes air out of exhaust port and will not fire..same problem with my finishe nailer . 90 psi on the ac check and lube the triggers--and ram rods --
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...porter cable framing nailer. It shot one nail and all it does is let all the air come out of the exhaust. I took the head off and found the collar broken. My question is. Would this cause air to leak ...
Question about Factory-Reconditioned Porter-Cable FC350AR Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer
...Porter Cable FR350A Framing Nailer continually leaks air from exhaust port My nailer continually leaks air out of the exhaust port. A friend, who had borrowed the gun, purchased a rebuild kit and ...
Usually answered in minutes!
317 Questions
162 Questions
122 Questions
