Questions & Answers for: pool cleaner gets stuck corners

Question about Jet - Vac Pressure Side Inground Automatic Pool Cleaner - White - Jv105

1 Answer

...pool y Jet Vac cleaner runs for a few minutes then gets stuck in a corner or by the steps. The tail continues to move; the vac is still working but won't get moving around the pool. every pool has a ...

Ad

Question about BARRACUDA G3 IN-GRND CLEANER

2 Answers

stuck in corner gets stuck in corners and takes ages to move again. Try adjusting your returns to change the currents in the pool and see if that helps. Add an additional hose

Ad

Question about Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

...pool cleaner get stuck in the pool corner. Ihave replaced the pipes with new ones. I have tried to add a baries onto the existing baires. Doesn't help. The pool is maybe wrongly built. Please help. ...

Question about Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

...hose weights. You can adjust your return flow lines in the pool. If they are directed toward the corners, try moving them down and center to direct the cleaner in the correct positions in the

Question about Phantom Pool Cleaner Complete with Booster Pump

1 Answer

...not move gets stuck in one spot Is the cleaner getting stuck at steps, corners, etc? If so, your spin out is too short. Change the cam to the "winter" position to increase the pool cleaners spin

Question about Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

...pool driving the cleaner to the corners. You propally just need to change the direction of the eye balls on you returns to the pool. Face them down the pool wall or just in another direction to break ...

Question about Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

...pool. This will ensure that the cleaner is pointing in the right direction. Check your hose weights to make sure that they are correct. You will know they are right if the cleaner is sitting at a 45 ...

Question about Baracuda G4 Automatic Pool Cleaner Ne221

1 Answer

pool cleaners are getting stuck on steps and in corners. Is the correct length of hose being used? It might be necessary to shorten. Make sure that the ideal flow is being achieved. Add hose weights 3

Question about Kreepy Krauly In-Ground Pool Cleaner

1 Answer

...cleaner should set at a 45 degree angle to the pool bottom). Adjust the hose weights if necessary. You may need to add a wall climb restrictor or a ladder guard. If none of these correct the problem, ...

...pool cleaner keeps getting stuck in the corner at the deep end of the pool The cleaner is unnamed but just like any other auto suction cleaner. The pool is 12mx4m & 2m deep rising to 1m I have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...