...paper that is stuck has gotten softer, and then it should pass the paper. If it still doesnt work, then, try some more oil on the paper, and then wait and then turn the shredder to the forward, and ...
...not working got some paper stuck on the paper shredder there's no paper in there any more but shredder won't shred any other paper perhaps the basket is not in properly. This has happened to
Paper stuck in the Fellows Paper Shredder I use a Fellows medium sized paper shredder and it is REALLY stuck. There is paper stuck so far in that is nearly impossible to get it out. I have been doing ...
stuck' paper. - Should the cutting rolls move, or how can one move them to check areas not easily visible for stuck material? Especially credit card plastic pieces I suppose could lock it up, no? Some
...stuck? Please advise. Thank you. Joan Kelly The Royal cx-6 shredder is a small consumer shredder rated for "up to 6 sheets at a time" so yes it will jam with anything more that 6. If running it in ...
Question about CX6 CrossCut Shredder
...stuck paper pieces Turn Shredder head over and repeat steps 3 and 4 Move power switch to the "Off" position Plug power cable back in Move power switch to "Rev" (reverse) position, if still stuck move ...
Question about CX6 CrossCut Shredder
stuck paper. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more
Question about CX6 CrossCut Shredder
...paper sensor switch is stuck down or if it has eye sensors, try and wipe clean or blow out with compressed air. Check the attached links,instruction and guides, Good luck "I hope this helped you out, ...
Question about CX6 CrossCut Shredder
...paper stuck to the cutters. A EPS-611x. FIRST MAKE SURE THAT YOU HAVE REMOVED POWER UNPLUG IT Using pick remove the paper that is stuck to the cutters, also you could try shredder oil to assist after ...
Question about CX6 CrossCut Shredder
...Cross Cutter Shredder. Please help! The continuous running tends to be that the sensor that detects that there is material still to be shredded is either dirty or has some paper stuck in front of
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions