Questions & Answers for: oven taking twice bake

Oven door will not close completely. Baking and roasting takes twice as long as required. Two janitors have tried without success to fix it i havent got a clue ive got the same problem, but im only 12

twice as long to cook a custard and I have had flat cakes. Casseroles seemed to take too long, too, but it always depends on the starting temp. of the casserole... It would seem that the oven might be

...oven takes an hour or so to preheat. Sometimes it's an hour and a half to just get it to 350 degrees. I have used the self-cleaning function twice in the past 2 weeks thinking maybe it needs cleaning ...

oven takes twice as long to preheat than what the timer says. Sometimes it never gets to the correct temp. It has always taken longer to preheat. It's very frustrating to wait 20 to 30 minutes for the

...oven the clean light keeps flashing. I ran it twice through the clean cycle but it still is flashing now what? 4 hrs Starts on broil for the first 30 mins followed by bake for the remainder. The door ...

...twice as long as it should. Its like the oven says 350 but its only 175 if you have ever used your self clean feature you probably damaged the sensor.I found out the hard way. NEVER use the self ...

...OVEN ISN'T GETTING TO THE TEMP SET, THE INDICATOR SIGNAL GOES ON BUT IT IS NOT BAKING PROPERLY, TAKING TWICE AS LONG TO BAKE A CAKE AND THE CENTERS DON'T GET DONE EVENLY. ALREADY HAD SOMETHING ...

...taking twice as long to cook? Hi, The broil is the top element and the bake is the bottom element...so with broil you are heating from the top and with bake you are heating from the bottom...if your ...

twice as long to bake or broil food. If the temp is set for 500, the oven temp might be 250. Hi, The ignitor is not working right and is going bad.... have the repair man replace the ignitor, or DIY..

...twice and replaced the fan and the relay control board. Interestingly, the oven seems to start heating up normally and does not click when outside of the wall enclosure and when the metal top ...